1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wrt54GS v 1.1

Discussion in 'DD-WRT Firmware' started by n9lya, Aug 20, 2006.

  1. n9lya

    n9lya LI Guru Member

    I have flashed my router with dd-wrt 23.. Love it... I am using it as an AP with a wrt300N as main router, however I have had to connect it directly via ethernet to my wrt300N to have access on a differnet channel and use my outdoot antennas...

    I would like to know if I can use it as an AP wirelessly without the hardwired cable.. Right now I have them on two differnt channels.. I believe to do it wirelessly I need them both on same channel IP of 300N 192.168.1.1 54gs is 192.168.1.1

    Please let me know if possible.. I have the 54gs set so 300n is gateway for it...


    Thanks Jerry
     
  2. HiSpeed

    HiSpeed Network Guru Member

    You have just to set your GS in "Client Bridged", same SSID, same encryption... but with an other IP address...
     

Share This Page