1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54GS v1.1 - Port Forward "Both" wonky w/ 4.70.6

Discussion in 'Cisco/Linksys Wireless Routers' started by sstackho, Sep 27, 2005.

  1. sstackho

    sstackho Guest

    Hi there,

    I recently installed firmware 4.70.6 (from 3.37.6) for my v1.1 WRT54GS, and now I seem to have port forwarding issues.

    I notice that I am getting the "yellow face" indicator in Azureus, which implies that the port forwarding settings are improper.

    One thing I did notice since the upgrade: When I check the "Port Range Forward" screen of the router, where it used to say "Both" under the "Protocol" drop-down box, they are now blank. The choices in the drop-down box are still "TCP", "UDP" or "Both", but when I try to save them as "Both" once more, it comes back as blank after the settings are saved.

    Setting the choice to TCP or UDP seems to stick.

    I haven't seen anyone else with this issue.

    One thing that is weird is that my Port Forwarding seems to work after trying to save as "Both", but eventually it stops working... (perhaps after a router reboot?)

    Any input would be appreciated. If I'm not too clear, I can post screenshots.
     

Share This Page