1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54GS v4 troubles.......

Discussion in 'Cisco/Linksys Wireless Routers' started by Dwezal, Jan 15, 2006.

  1. Dwezal

    Dwezal Network Guru Member

    The router is bricked. I was able to ping the router & even load the latest Linksys firmware, But after I reboot the router the power LED continues to flash non-stop. I can tftp any version of firmware to the router but the power LED still continues to flash non-stop

    Any ideas?
  2. Dwezal

    Dwezal Network Guru Member

    Well finally after hours & hours of attempting to debrick this damn thing I finally got it working again!

  3. willmcgregor

    willmcgregor Guest

    How did u manage it? Im stuck with the same problem :(
  4. Dwezal

    Dwezal Network Guru Member

    I notices pins 5 & 6 were touching, I must have pressed them together with the screw driver to debrick

    ...so I used a razor blade to separate the 2 now all is well

Share This Page