1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wrt54gs v6.0 jtag mistake...HELP!!

Discussion in 'Cisco/Linksys Wireless Routers' started by nikki82, Nov 19, 2012.

  1. nikki82

    nikki82 Serious Server Member

    I have without thinking erased my wrt54gs vve managed to find a copy of a gfe bin file for my model but am lost on how to flash it to the router and change the the mac address to binary and edit the file.

    any help will be fantastic
  2. mstombs

    mstombs Network Guru Member

    How did you manage to do this? Interrupt a dd-wrt VxWorks conversion? If the CFE really gone only option is JTAG. The default mac address is stored in plaintext so can probably be done with hexeditor. or with one of the available software tools, but JTAG needs a special hardware connection.

    BUT do try all the dd-wrt debricking methods first, it is hard to damage the CFE - there's a reasonable chance you can use tftp or similar to revive.

Share This Page