1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.


Discussion in 'DD-WRT Firmware' started by usgard, Apr 23, 2006.

  1. usgard

    usgard Network Guru Member

    on which versions of the wrt54gs can I install and run the dd-wrt firmware?

  2. lwf-

    lwf- Network Guru Member

    All of them, but the latest one running vxworks is not very good and neither is the first one.
  3. Toxic

    Toxic Administrator Staff Member

  4. ofbarea

    ofbarea Network Guru Member

    the common builds can be installed in all WRT54G/GL/GS Ver 1.0 to Ver 4.0.

    The micro build following the JTAG cable procedure could be used with WRT54G/GS ver 5.x, but is really difficult to implement and you will not have all the nice features of the common builds.

    If you want a to buy a new router to use with DD-WRT, consider getting a Buffalo WHR-G54S. For around $50 you will have a router that works better with DD-WRT than WRT54 ones.
  5. lwf-

    lwf- Network Guru Member

    My bad, I was thinking about WRT54G v1.0.

Share This Page