1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wrt54gs w/sartori wont change port forwarding settings

Discussion in 'Sveasoft Firmware' started by christaylor, Oct 28, 2004.

  1. christaylor

    christaylor Network Guru Member

    Hello, and thanks in advance for any help. I am having a problem with my wrt54gs with the final build of sartori:

    I cannot make any changes to the port forwarding in the applications/game section. I initially wanted to forward remote desktop (port 3389) to a machine at, and it was working fine. Later I tried to change it to a machine at, and edited the fields appropriately, and saved my changes.

    I then tried to remote into the box at .30, but instead managed to piss off my customer who was working on the .10 machine, and got booted off in the middle of his project. I verified that the changes were still recorded in the web interface of the router (they were), I tried to delete them and create another forward path, to no avail. Currently there is nothing showing up in any of the boxes of the web interface (other than 0 for ports and ip) but it is still forwarding to the machine at .10

    Any idea what I am doing wrong? -Chris 8O
  2. christaylor

    christaylor Network Guru Member

    forwarding issues

    I noticed that there is another person with the same question at the sveasoft site, but it didn't get any response.
  3. Toxic

    Toxic Administrator Staff Member

    have you enabled DMZ by any chance?

    the only other thing i could suggest is a hard reset and start again.
  4. christaylor

    christaylor Network Guru Member

    DMZ was not enabled when the problem first occured, but I have tried to enable it when troubleshooting, but no luck.

    A full re-install is not practical, as the machine is half way across the country, I think I will change the machines ip's, and be done with it.

Share This Page