1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54GX v2 - v2.00.15 (or later) EU/ETSI Firmware??

Discussion in 'Cisco/Linksys Wireless Routers' started by dannyp, May 29, 2006.

  1. dannyp

    dannyp Network Guru Member

    It's been over two months now since the US version of v2.00.15 firmware made its appearance for the WRT54GX v2.

    I still cannot find the European (EU/ETSI) version that will allow me to run my router on Channel 13. :(

    I'm trying to avoid interferance with my 2.4Ghz video sender.

    I'm really disapointed with Linksys's support of this model. The UK firmware download page doesn't even have the v2 available to select on the list!! :thumbdown:

    If anyone has managed to get thier hands on a v2.00.15 or later EU/ETSI version please post how!?

    Thanks

    Danny
     
  2. p2dewit

    p2dewit Network Guru Member

  3. dannyp

    dannyp Network Guru Member

    No kidding - I'm sure this hidden menu wasn't there before - was it?

    Thanks :thumbup:
     
  4. dannyp

    dannyp Network Guru Member

    Well you are not wrong but..... when I do this and choose channel 13 the WIFI is not operational and the router causes interference all over the 2.4Ghz band (i.e. wireless video senders etc).

    Selecting channel 12 works OK though, although the router lost it's marbles (no response from router and port 1 & wan lights flashing rapidly despite no traffic and the wan light was off) after a couple of days and needed to power cycle the unit to get it working again.

    :???:

    Puzzled
     
  5. WARPed-too

    WARPed-too LI Guru Member

    That tip also took me to that menu on my wrt54gx2, cook. Are there anymore hidden menus?
     
  6. alindenf

    alindenf Network Guru Member

    Nice but not

    Guys i need some help.

    after the update i only get a Blinking power LED and thats it.

    firmware was corrupt that was the last error and it was over

    is there something that i can do besides RMA :sadbye:
     

Share This Page