Warning: Newbie 8O I set everything up as best I could. From all the wired connections to the unit I easily connect to the net, but from the one wireless computer I can not. The one unit that is wireless, the laptop, communicates fine with the internet when I use the wired card. It appears that DHCP works fine on the wired connections, but does not seem to be assigning an IP address within range to the wireless. When I assign an IP address to the laptop within the network's range, I can at least see the other computers that are connected by wire and I can access the Linksys interface from it. How do I start to track the problem down from here?