1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRTG54GS: Static IP and Recursive DNS will not surf

Discussion in 'Networking Issues' started by Jarhead1899, Aug 13, 2005.

  1. Jarhead1899

    Jarhead1899 Network Guru Member

    If DHCP is enabled on the clients the clients can surf. If a static IP is assigned to the clients they cann only surf with the ISP's DNS server entries.

    DynDNS: recursive dns service has been subscribed to.

    The ISP is Adelphia.

    I can ping the DynDNS recursive servers. I can ping my ISP DNS servers.

    If a static 192 IP is assigned to a client, as well as the recursive DNS servers are entered into the client, the clients cannot surf.

    If a static 192 IP is assigned to a client, as well as the ISP DNS servers are entered into the client, the client can surf.

    If the recursive DNS servers are entered into the Routers admin home page the static clients as well as the DHCP client cannot surf.

    Only the clients that are pulling a DHCP lease (with the default DHCP settings) or with a static IP address with the ISP DNS servers, with no additional DNS information assigned in the routers home page can the clients surf.

    The above config (static IP and recursive DNS assigned, as well as the recursive DNS assigned to the router's admin page) worked with a WRK54G v 1.1 router.
     
  2. 4Access

    4Access Network Guru Member

    Has your IP address changed since you were using the WRK54G? Check you current IP address at http://www.WhatIsMyIp.com and then make sure it's configured correctly at DynDNS.com here

    If that's not the problem have you tried contacting DynDNS's support about the problem? Since you're a paying customer I imagine they should be able to help you.

    Good luck.
     

Share This Page