1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRTP54G Won't Phone Home

Discussion in 'Other Linksys Equipment' started by mazilo, Nov 24, 2005.

  1. mazilo

    mazilo Network Guru Member

    Ironically, I have one of my WRTP54G units won't like to phone home to Vonage to get provisioned. It comes with a v1.00.20 firmware. I want to let it provisioned by Vonage so that it will also perform a firmware upgrade. The v1.00.20 firmware doesn't have a feature to allow the unit manually upgade the firmware.

    If anyone who knows how to get WRTP54G with v1.00.20 firmware to perform a firmware upgrade, please let me know and I will appreciate that.

    EDIT: Is there a way to send some sort of wake up call through a weblink to activate the device to phone home to Vonage?
     
  2. NateHoy

    NateHoy Network Guru Member

    There's another third-party forum site, www.vonage-forum.com , that you should check out. Someone posted updated (official) firmware there with instructions on loading it, if I recall.
     
  3. mazilo

    mazilo Network Guru Member

    Did you mean this post? If so, it doesn't help. My problem is the WRTP54G does not even issue a DNS request to look for ti.tftp.vonage.net; however, it keeps pounding the IP address of 192.168.15.100 to ask for provisioning. Something really screws my WRTP54G. I believe I will have a solution to fix this problem easily.
     

Share This Page