1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRV200 and other brand VPN routers

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by jaydub2, May 11, 2008.

  1. jaydub2

    jaydub2 Addicted to LI Member

    I just got a WRV200, and have a few D-Link DI-804HV on an existing VPN. I got the WRV200 because the 804HV's were discontinued.

    I'm trying to set up the VPN, and even going through everything carefully, the VPN is not working. Before I proceed any further, is interoperability between brands a lost cause?
     
  2. jaydub2

    jaydub2 Addicted to LI Member

    Problem solved. Sometimes it pays to sit back and take a break.

    I set the WRV200 to not use Autokeying, and use 3DES/MD5 for both ISA and IPSec. Lifetime for everything is 28800. Ditto for the D-link.
    One important thing was to have PFS checked.

    The other features such as DPD are unchecked, but I think they shouldn't make a difference.

    This is on 1.0.38 firmware. Funny thing is the VPN Status screen is useless. It constantly says it is trying a connection, even when it is connected. Trouble shoot only by viewing the logs.

    Hope this helps someone in need later.
     

Share This Page