1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRV200 and QuickVPN problems

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by els_ernie, Jul 24, 2007.

  1. els_ernie

    els_ernie LI Guru Member

    I am a newbie to WRV200 and trying to get a simple VPN connection from the QuickVPN utility to the WRV200.

    I am using the latest beta versions - 1.0.33 for WRV200 and 1.2.2 for QuickVPN.

    I setup the VPN Client Access Page in the web utility of WRV200 and exported a client certificate to put in the appropriate folder for QuickVPN.

    When I try to VPN, QuickVPN shows that it is connected. However, I cannot access any resources on my home network. I can ping some of the devices using their LAN IDs. But, I cannot access them.

    What might be wrong? Any help will be greatly appreciated.

  2. ifican

    ifican Network Guru Member

    If you can ping lan devices you are connected, check firewall settings, access restrictions and make sure the folders are shared on the machines in question.
  3. els_ernie

    els_ernie LI Guru Member

    I do not have any access restrictions or firewalls. The resource I am trying to access is a Buffalo LinkStation NAS device connected directly to the WRV200.

    Any ideas?
  4. ifican

    ifican Network Guru Member

    Is your local lan at home on a different ip range then the lan that you are connecting from?
  5. grimbeaver

    grimbeaver LI Guru Member

Share This Page