1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRV200 and VPN issues

Discussion in 'Networking Issues' started by jaspurr77, Jan 7, 2008.

  1. jaspurr77

    jaspurr77 LI Guru Member

    WRV200 running the latest beta firmware along with the QuickVPN 1.2.8 on Vista. It hangs on 'verifying network' and times out. Any thoughts? The log follows.....

    2008/01/07 17:59:14 [STATUS]OS Version: Windows Vista
    2008/01/07 17:59:14 [STATUS]Windows Firewall Domain Profile Settings: ON
    2008/01/07 17:59:14 [STATUS]Windows Firewall Private Profile Settings: ON
    2008/01/07 17:59:14 [STATUS]Windows Firewall Private Profile Settings: ON
    2008/01/07 17:59:14 [STATUS]One network interface detected with IP address 192.168.1.102
    2008/01/07 17:59:14 [STATUS]Connecting...
    2008/01/07 17:59:14 [STATUS]trying to connect to remote gateway with IP address: xx.xxx.xxx.xx (x's for secuirty reasons)
    2008/01/07 17:59:18 [STATUS]remote gateway was reached...
    2008/01/07 17:59:18 [STATUS]Provisioning...
    2008/01/07 17:59:30 [STATUS]Success to connect!
    2008/01/07 17:59:30 [STATUS]Verifying Network...
    2008/01/07 17:59:33 [WARRING]Fail to ping the remote VPN Router!
    2008/01/07 17:59:34 [WARRING]Fail to ping the remote VPN Router!
    2008/01/07 17:59:35 [WARRING]Fail to ping the remote VPN Router!
    2008/01/07 17:59:36 [WARRING]Fail to ping the remote VPN Router!
    2008/01/07 17:59:37 [WARRING]Fail to ping the remote VPN Router!
    ...... and so on until it disconnects.

    Thanks!
     
  2. Darkfall

    Darkfall Guest

    Same problem with the QuickVPN 1.1.0 or 1.2.8 on Windows XP and WRVS4400N 1.1.03 router.

    any ideas? Thanks!
     
  3. suf825

    suf825 Guest

    QuickVPN 1.2.8 on XP and WRVS4400N 1.1.03 router

    Same problem with the QuickVPN 1.2.8 on Windows XP and WRVS4400N 1.1.03 router.

    any ideas? Thanks!
     
  4. srw777

    srw777 Guest

    For what it's worth, I fought with this for several days on a WRVS4400N, and even got it working for an hour before it quit again. My solution? Replaced the WRVS with a WRT54GL, installed dd-wrt firmware, and used the PPTP server which uses the stock windows "dialup VPN" connection.
     
  5. nheimler

    nheimler LI Guru Member

    Ditto...same problem here as well and I'm not finding anymore info in the forums that I already haven't tried. Supposedly the 1.0.37 was supposed to fix this, but not for me.
     
  6. nheimler

    nheimler LI Guru Member

    Are you by chance using a wireless connection when this happens? If so, try using a hard wired Internet connection and see if it works just fine for you. This seems to be an issue that hard wired works, but not wireless connections.
     

Share This Page