WRV200 - Different Subnets

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by johnu, Jan 28, 2008.

  1. johnu

    johnu LI Guru Member

    Is it possible to setup each VLAN to have a different subnet?

    For instance, VLAN1 gets DHCP from the router.
    VLAN2 is a small business network that has a Domain Controller that also serves as a DHCP server, so I don't want DHCP on at the router level.

  2. Sfor

    Sfor Network Guru Member

    It is not possible to ban the access to the built in DHCP server in the WRV200 device. So, it is not possible to run WRV200 dhcp server along with some other DHCP server.

    You would have to use two different DHCP servers in two VLANs. With the WRV200 DHCP switched off.
  3. johnu

    johnu LI Guru Member

    Erm.. OK - thanks for the reply.

    I was under the impression if DHCP on the router is disabled, the VLANs wont be able to access the internet.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice