1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRV200 Firmware .32 and SIP

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by jtimbr7546, Jan 4, 2008.

  1. jtimbr7546

    jtimbr7546 LI Guru Member

    I am currently stuck on firmware .29 because when I tried to upgrade to firmware .32 my VoIP (SIP - Broadvoice) provider no longer functions. I am connecting to the AP via wireless and I have tried everything from an unsecure network to my normal WPA-2 encrypted and nothing works. Everything seems fine under .29 with SIP and WMM. Any other suggestions? Thanks.
     
  2. Toxic

    Toxic Administrator Staff Member

    and what about 1.0.37?

    http://www.linksysinfo.org/forums/downloads.php?do=file&id=80

    Issues Fixed:

    1. Support NetBIOS broadcast over a Gateway-to-Gateway IPSec tunnnel. Now users can search computers by names or browse the network neighborhood on Windows Explorer.

    2. Fixed the problem that QuickVPN Client (Windows XP, 2000, or Vista) behind a NAT device cannot connect to WRV200.

    3. Fixed an issue with SIP ALG that times out NAT entry prematurely, causing incoming calls from internet not able to get in.
     
  3. jtimbr7546

    jtimbr7546 LI Guru Member

    I certainly will try this and see if this will allow my SIP provider to register...that was the issue with .32 :) Thanks
     

Share This Page