1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRV200 + OpenVPN

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by anchiang, Sep 26, 2006.

  1. anchiang

    anchiang LI Guru Member

    Heya all,

    is it possible makes the WRV200 as VPN server, and openVPN as client to connect to server?
    then force the client internet connection through vpn?
  2. Toxic

    Toxic Administrator Staff Member

    OpenVPN is an SSL VPN client and not a IPSec client. it wont connect sirectly to a WRV200 using VPN.

    SSH Sentinel, GreenBow and NCP should work fine with the WRV200
  3. anchiang

    anchiang LI Guru Member

    How should i configure my WRV200? Do you have any guide to follow? Because i'm quite blur about all this vpn.
  4. DocLarge

    DocLarge Super Moderator Staff Member Member

  5. Toxic

    Toxic Administrator Staff Member

    you can also use QuickVPN (available in Downloads section)
  6. perak

    perak Network Guru Member

    Reading the specification of the new RVL200 it is stated to allow SSL VPN clients to connect.
    I do not have this router, but it would be interested to know if anyone succeded in connecting with the OpenVPN client.

    Another alternative is to buy a WRT54GL and install the 3rd party
    DD-WRT firmware v23 which have a VPN version supporting OpenVPN.
    I have not tried this myself as I am still trying to improve my Linux skills.
  7. Toxic

    Toxic Administrator Staff Member

    You dont need OpenVPN for the RVL200. MSIE is all that is needed. you type in the IP Adddress or dyndns name of the WAN for the RVL200 using HTTPS:// and you connect to the RVL200, it prompts you for a username/password. you then enter the details in and the RVL200 will then give you a new window. you click on the icon on the center of the window, and a Virtual passge driver is installed on your PC and the PC then is given a IP address from the RVL200 over an SSL VPN connection.

    the user doesn't want an alternative, he has a WRV200 already.
  8. anchiang

    anchiang LI Guru Member

    what is the latest firmware? Mine is 1.0.20.
    Toxic, i can't connect to the https you mention. do i need to enable something?

Share This Page