1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRV200 quickvpnplus issues

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by dsieme01, Nov 2, 2008.

  1. dsieme01

    dsieme01 Guest

    I am having problems with getting a vpn connection working.

    Log from quickvpnplus (indications a connection\C:\Program Files\Linksys\Linksys VPN Client>QuickVPNplus.exe -r goats.dyndns.
    tv -u ids -p password -c any -v -F2
    QuickVPNplus ver: 1.0.6
    Flags: 2 (0x2)
    OSver: 5.1
    [T] Figuring out local interface.

    [T] ipADD 192.168.5.138
    [T] defGW 192.168.5.1
    [T] match found - I am done here.
    [T] interface type: 6

    Local ip address: 192.168.5.138

    Requesting configuration data from 72.230.254.5 ...
    [T] Uri: https://LSiemens:$ilyb.971$@72.230.254.5:443/StartConnection.htm?ve
    rsion=1?IP=192.168.5.138?PASSWD=%24password%24?USER=ids

    using WinHTTP
    SSLsrvCert: US California Irvine "Cisco-Linksys, LLC" WRV200 WRV200 Default
    [T] HTTP response: 200 - Ok

    [T] Server response
    ---------------------------------
    version=1
    msgtype=configuration
    conn quickvpn0
    presharedkey=3K9ULZQ0mzIkGnFQbc
    rightsubnet=192.168.18.0/24
    remotelanip=192.168.18.1
    dnsserver=
    dnsserver2=
    domain=linksys
    ---------------------------------
    LocalAddr: 192.168.5.138
    LocalMask: 255.255.255.255
    LocalSubnet: 192.168.5.138/255.255.255.255
    Presharedkey: 3K9ULZQ0mzIkGnFQbc
    DNSserver:
    RemoteNet: 192.168.18.0
    RemoteMask: 255.255.255.0
    RemoteSubnet: 192.168.18.0/255.255.255.0

    Deactivating ipsec policy QuickVPNplus ...
    ipseccmd -w REG -p QuickVPNplus -y
    Error converting policy: 0x2

    The command completed successfully.
    Removing ipsec policy QuickVPNplus ...
    ipseccmd -w REG -p QuickVPNplus -o

    The command completed successfully.
    Creating ipsec policy QuickVPNplus rule Host-RemoteNet ...

    ipseccmd -w REG -p QuickVPNplus -r Host-RemoteNet -t 72.230.254.5 -f 192.168.5.
    138/255.255.255.255=192.168.18.0/255.255.255.0 -n ESP[MD5,3DES]3600S/50000KPFS -
    a PRESHARE:"3K9ULZQ0mzIkGnFQbc" -lan -1p

    The command completed successfully.
    Creating ipsec policy QuickVPNplus rule RemoteNet-Host ...

    ipseccmd -w REG -p QuickVPNplus -r RemoteNet-Host -t 192.168.5.138 -f 192.168.1
    8.0/255.255.255.0=192.168.5.138/255.255.255.255 -n ESP[MD5,3DES]3600S/50000KPFS
    -a PRESHARE:"3K9ULZQ0mzIkGnFQbc" -lan -1p

    The command completed successfully.
    Activating ipsec policy QuickVPNplus ...

    ipseccmd -w REG -p QuickVPNplus -x

    The command completed successfully.

    Configuration done.

    C:\Program Files\Linksys\Linksys VPN Client>
    ---------------------------------------------------------
    When I try to ping devices on the remote network I get negotiationg IP security.

    I have tried connections from having the client on a public ip to no success.

    When I try the quickvpn gui client I get an errorn about the remote gateway is not responding.

    The client machine in this instance is a windows XP with SP3 box. I have the windows firewall / Internect Connection service disabled at the moment.

    -------------------------------------------------------------------
    Other notes.
    I have not been able to gain access to the wrv200 configuraiton page remotely. I was sure it was set to answer to remote connections http & https on port 8080 Maybe forgot to save but will have to check when their next.

    The quick vpnplus client is the 1.06 version
    I do have the support tools package installed.
    I have upgraded router firmware to version 1.0.39.
     

Share This Page