1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRV200 v1.0.35 AND v1.0.36 Beta Firmware Released.

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by Toxic, Oct 11, 2007.

  1. Toxic

    Toxic Administrator Staff Member

    WRV200 Firmware 1.0.36 Release Note 10/10/2007 (Beta Testing)

    Issues Fixed:

    1. Attempt to fix a FTP problem by resetting the firewall ALG module hourly. The fix is not applicable to users who do not experience this problem.

    ----------------------------------------------------------------------------------------------------------------------

    DOWNLOAD: WRV200 v1.0.35 Beta Firmware

    DOWNLOAD: WRV200 v1.0.36 Beta Firmware


    Please give as much info on WAN setup and how to replicate any FTP issue you still have with this firmware.

    PLEASE NOTE:
    1.0..36 is applicable to all WAN connection types. 1.0.35 is specific to DHCP.
     
  2. MarkToo

    MarkToo LI Guru Member

    Nice to see that an attempt at correcting the FTP issue is being made. :)

    I hope to be able to test this out in the next few days but maybe not until next week.

    Thanks,
    Mark
     
  3. ghost_zero5

    ghost_zero5 LI Guru Member

    Should this fix the ICQ problems too (especially: what happens after an hour if you are connected to ICQ, will you loose connection and need to reconnect?) ..?
    I don't know if hourly is completely enough though... I once - don't know why though- had this problem more than once per hour...

    EDIT: Didn't have the ICQ-Problem so far...
    BUT: The router is one hour behind although auto-adjust daylight saving time is active...
     
  4. ghost_zero5

    ghost_zero5 LI Guru Member

    OK...
    Well it seems that FTP keeps working now BUT ICQ not. I just had the problem with ICQ again but unnormal is now that FTP still worked (normally FTP and ICQ stop to work)...
     
  5. Toxic

    Toxic Administrator Staff Member

    what part of icq is not working? is it connecting to the icq server? file transfers broken, what? are you forwarding the correct ICQ ports?
     
  6. ghost_zero5

    ghost_zero5 LI Guru Member

    It suddenly stops to work completely BUT works just fine until that point (like the FTP problem that was why I thought this would have been "fixed" with this firmwrae too but seems to haven't been fixed)...
    You lose connection to server and can't reconnect...

    Same problem like with FTP previous to v1.0.36...
    By adding port 5190 to port triggering you get around this problem but that is not really a solution - best case a workaround (I am not sure, you might still have at least to reconnect to ICQ sometimes but it won't stop to work completely at least but in any case it is no real solution)...

    Regarding forwarding: There should be no need to forward ports (except for file transfers - never had to do with any other router) - especially if you forward ports you can only connect to ICQ from one PC...
     
  7. Toxic

    Toxic Administrator Staff Member

    and did you try port forwarding? (NOT port triggering) you will find many vendors have workarounds/solutions for ICQ and routers by port forwarding. just google it and you will see.
     
  8. ArchCC

    ArchCC LI Guru Member

    Yeah... have some problem with ICQ as ghost_zero5. After 3.5 hour ICQ lost connection to the server and can't get it back for few mins. After connetion return it start lost it every few minuts.(it's all about when port triggering off)
    When triggering on, ICQ work, lost connections every 1-2 hour, but get it back soon for other 1-2 hour.
    Some happen with eMule...

    Try FTP connections (w/o port triggering)... looks like it work, but i am not sure that it not dropd after 4-5 hour... try to test it more longer.

    Try to set port forwarding... but if it work you can connect to icq only by 1 PC...

    Anyway it seems that next solutions be lookd like : "Get tamburine and when full moon rising dance with it around pile and you, by gods sake, get for your icq connection for next 5 hour". just joke ^_^
     
  9. Toxic

    Toxic Administrator Staff Member

    what type of WAN connection are you guys on?
     
  10. ArchCC

    ArchCC LI Guru Member

    Static IP
    Try to use port forwarding after disable triggering. disconnects every 2mins like i say in last message.
     
  11. pinion247

    pinion247 Guest

    Dead Router?

    Hi all,

    I just installed this update and the router never came back. I gave it 30 minutes, thinking it was just really slow installing the update. So I reset it and the lights come on (except for the wireless light) and nothing can connect to it. Not sure if there's anything I can do... this box has been garbage since the second I turned it on and I was hoping this update might make it tolerable (I have to restart the damn thing every day and even then it chokes up when using VPN or FTP).
     
  12. ghost_zero5

    ghost_zero5 LI Guru Member

    I use "Automatic Configuration - DHCP" for WAN-Type...
    Here we have more or less something in common - as most people will surely use PPPoE or PPTP... And Static IP and DHCP shouldn't be that much different...
    And port forwarding is no real option (because of more reasons but main reasons that I dislike to open any port longer than for a specific period of time at all) - neither is port triggering really one...
     
  13. juergenjagst

    juergenjagst LI Guru Member

    Yes, the NTP time feature is one hour behind regardless of daylight save feature is enabled or not.
    Yes, admin interface is not accessible after clicking reboot if using a wireless lan connection. Only power-cycle helps.
    Yes, there are still dropouts (~once per day) if using a 2102 ATA. Only power-cycle helps.
    Yes, FTP starts fine, but after 1 or 2 transfer-uploads the server becomes unaccessible (without port triggering workaround). Only power cycle helps.
     
  14. Toxic

    Toxic Administrator Staff Member

    ghost, can you confirm if Port forwarding is working though? everyone is reporting that FTP does not work, but who is using port triggering and who is using port forwarding to see what is broken? WAN type is also welcome in any given info.
     
  15. cactusfazer

    cactusfazer Network Guru Member

    Ftp

    I have V1.0.33 and FTP work fine. I use port forwarding (21) and NEVER i have to restart my WRV200. For this, tehcnical of linksys said that the router have to be in an IP range like 192.168.x.x. It's the same bug for the PAP2 ! It's the only one thing that i have to do for working well.
    My configuration is:
    PPoE ADSL (not fixed IP).
    MTU of 1400 (for VPN IPSEC)
     
  16. Toxic

    Toxic Administrator Staff Member

    Just put up v1.0.35 on the site. 1.0.36 fix is applicable to all WAN connection types. 1.0.35 fix is specific to DHCP.
     
  17. kspare

    kspare Computer Guy Staff Member Member

    for all you guys with port triggering problems, can you try port forwarding and see if that resolves the problem?

    Also you should upgrade to .35, i've been working the router with any many services as I can use and it's been holding up very well, this includes qos and port forwarding rules.

    Thanks.
     
  18. WroKeN

    WroKeN Guest

    Hello, i try the firmware 1.0.35 and the 1.0.36, and the problem is solved, thanks, very thanks.
    But, now i have problem with live MSN. The msn falls in each short while. why?, you can fix that?
    Now i work with firmware 1.0.35 , and i try mtu auto, 1400, 1480, 1450 and the problem persist.
     
  19. dontbotherme

    dontbotherme Network Guru Member

    I had the same problem trying the WRV200_1.0.36.img.
    Now I have a lovely brick :)

    Any ideas?
     
  20. eemeli79

    eemeli79 LI Guru Member

    I updated WRV200 to Firmware 1.0.35. When I go to ../WirelessSecurity.asp page I get this error:

    404 Not Found
    File not found.

    after "Select SSID:" dropbox. How I can set Wlan security now?
     
  21. Sfor

    Sfor Network Guru Member

    The 1.0.35 firmware hourly DHCP renewal feature has a nasty side effect. VPN tunnels are resetted during DHCP renewal procedure. Network connections made through VPN are breaking, every full hour.
     
  22. Toxic

    Toxic Administrator Staff Member

    jay you got any VPN tunnels running on .35?
     
  23. DocLarge

    DocLarge Super Moderator Staff Member Member

    I'm putting the wrv200 on right now. Can you put yours on also and we'll check it out in tandem?

    I've got 1.0.35 running on mine...
     
  24. Toxic

    Toxic Administrator Staff Member

    lol I'll have to find it first. hahaha
     
  25. DocLarge

    DocLarge Super Moderator Staff Member Member

    :) Smart azz...

    Look under your desk, it might be what's keeping it level... *heh*
     
  26. Sfor

    Sfor Network Guru Member

    Here are my log entries:
     
  27. pepemosca

    pepemosca LI Guru Member

    Like mine, after becoming a brick :)

    Sh*ty update :(
     
  28. pepemosca

    pepemosca LI Guru Member

    Lovely :)
     
  29. Sfor

    Sfor Network Guru Member

    Wait!... There is more!...

    I switched to the static IP. At full hour the VPN stops working and does not connect any more.

    VPN log says only:
    The SysLog says:
     
  30. Toxic

    Toxic Administrator Staff Member

    found it, though took an hour!
     
  31. Sfor

    Sfor Network Guru Member

    I switched to 1.0.36. 1.0.35 seems to be useless to me.
     
  32. cactusfazer

    cactusfazer Network Guru Member

    I was having the same problem with firmware 1.0.29 on wifi but not on RJ45 port. It was ok for me when i put 1400 for the MTU.
     
  33. DocLarge

    DocLarge Super Moderator Staff Member Member

    Sfor,

    Toxic, kspare, and I have seen the problem for ourselves (vpn tunnels rebooting). Due to this only occuring in my lab, it's not such a big deal for me, but for others in a small business environment, this coud be an issue.

    Our developer teammate will have this issue by the end of the day and we'll wait back to see what he and his folks will do...

    Additionally, I didn't see my ports switching modes (blocking , learning, etc...) so there must be an issue with your port 4. Is the problem still occurring?

    Jay
     
  34. Sfor

    Sfor Network Guru Member

    Well. I've counted 3 reboots, just tooday. But, I had no SysLog server running. So, I know nothing about the cause of those reboots.
     
  35. DocLarge

    DocLarge Super Moderator Staff Member Member

    You're saying that your "vpn tunnels" are rebooting, right? I just want to make sure. I'm using 1.0.35 and my totatal system uptime is 22hrs "but" my vpn tunnels have restarted a few times; they haven't restarted since 1101hrs today so they are stable for now.

    What was the outcome with port 4 on your wrv200 going through blocking-forwarding? Did it do it again?

    jay
     
  36. Sfor

    Sfor Network Guru Member

    I was busy today, so I was unable to guard my WRV200. Still, I know it rebooted itself 3 times or more.

    I have to wait until the SysLog serwer captures some reboot event.

    I'm running 1.0.36 now. I saw no VPN related problems with this firmware version, so far.
     
  37. Sfor

    Sfor Network Guru Member

    I lost the GUI access, today. Looks like 1.0.34 is much more resistant to router hang related problems than 1.0.36.

    I know my router is not working correctly, but a failing device can be a good test ground for the hardware failure management. 1.0.34 seemed to be extremely resistant to such problems, as it did reboot router on every sign of a failure.

    I think I will change the firmware back to the 1.0.34 version. Then I'll replace the router with the other one I have in the remote location. I need to be sure if the frequent reboots problem I'm facing now is caused by the router hardware failure, or if it is caused by some kind of interaction with my LAN devices.
     
  38. ghost_zero5

    ghost_zero5 LI Guru Member

    I will try this next... First I will wait until that error occurs and then activate port forwarding and re-test (and then just to confirm deactivate port-forwarding and re-test too, maybe I will then wait some time too)...

    Btw.: I also tried v1.0.35: That "solution" is not really a good idea: With hourly disconnects you get disconnected from ICQ every hour, not to mention about online games and regarding downloads (good with a download manager that is not the problematic but still). VPN of course would experience the same issues...
     
  39. woodmouse

    woodmouse Network Guru Member

    The router also resets DYNDNS every hour !!!
    Your DYNDNS account gets locked after some time, is there a way to make the router renew DYNDNS less often ???

    I am on a cable connection, which does not release the IP so often !!
     
  40. woodmouse

    woodmouse Network Guru Member

    I have set the DHCP to 86400 seconds (which was default for DHCP), but it won't change the times that DYNDNS gets refreshed...
    After a day or three, you get kicked off.

    DynDNS already asked me to put a Windows Client instead, until the issues are solved with this firmware...

    You can check ip-refreshes at :

    http://www.dyndns.com/account/services/hosts/auxlanglog.html
     
  41. Sfor

    Sfor Network Guru Member

    The DHCP Client Lease Time has nothing to do with the WAN DHCP negotiation.

    If you are using 1.0.35 firmware, you can do nothing about it, except for the firmware change to 1.0.36 or any older like 1.0.34, for an instance.
     
  42. woodmouze

    woodmouze LI Guru Member



    1.0.35 is specifically for DHCP WAN, and 1.0.36 is for all others... I guess I can install 1.0.36 instead, without a problem (1.0.36 will also incorporate DHCP connections I hope)... if not, I would have to revert to 1.0.35 again...
    I will test this now !
     
  43. Sfor

    Sfor Network Guru Member

    No. You are wrong.
    DHCP works correctly in the 1.0.36. But, I do believe 1.0.34 is more stable.
     
  44. woodmouze

    woodmouze LI Guru Member

    It still works :) -- will see if it renews DYNDNS in 30 minutes (it is already running 30 minutes with 1.0.36)
    I have cable connection, and apparently DYNDNS does not like updates every hour with the same IP - and I have a paid DYNDNS account ;-)
     
  45. Doodsaq

    Doodsaq LI Guru Member

    This was supposed to fix the FTP issues?

    hahahahahaha


    Almost a nice try Linksys. Almost. But no. This thing still sucks. :thumbdown:
     
  46. ghost_zero5

    ghost_zero5 LI Guru Member

    OK.
    I now tried port forwarding and it didn't solve my ICQ Problem (Port Triggering does though).
    Not even putting my PC into DMZ did solve the ICQ Problem.
    Interesting though: This time even FTP didn't work (last time FTP worked and ICQ didn't because of v1.0.36 - this time both aren't working - well I try to wait one hour or so to see if after the firewall ALG modul restart FTP might work again and to see what happens to ICQ and then retest port forwarding).
     
  47. juergenjagst

    juergenjagst LI Guru Member

    OK.
    Those 1 hour stuff shows that LinkSys firmware guys do not have a clue how to fix
    this problem...they are looking for a quick and dirty workaround...absolute wrong way.

    New thing: Connecting via WLAN (WPA-PSK TKIP , fixed MAC-IP assignment) at fixed
    IP-numbers on WRV200 and computer causes loss of connection at least once
    per day on all protocol port numbers. WLAN hangs. No reconnect. Only requesting an IP
    via DHCP from WRV200 works. DHCP extreeeeemly low.

    FTP...pfffttt...
     
  48. ghost_zero5

    ghost_zero5 LI Guru Member

    Nope... Even after one hour... FTP and ICQ were still not working... Only with port triggering enabled they did...
    So it seems that there might be different problems that cause FTP and ICQ to stop working (one might be related to the firewall modul - or that one doesn't exist at all) and one seems to have a completely different source (I guess it is related to the WAN-Connection because if I release DHCP and renew it works again (like v1.0.35 would do every hour but I can't let the router release and renew every hour automatically)....
     
  49. ghost_zero5

    ghost_zero5 LI Guru Member

    Nope... Even after one hour... FTP and ICQ were still not working... Only with port triggering enabled they did...
    So it seems that there might be different problems that cause FTP and ICQ to stop working (one might be related to the firewall modul - or that one doesn't exist at all) and one seems to have a completely different source (I guess it is related to the WAN-Connection because if I release DHCP and renew it works again (like v1.0.35 would do every hour but I can't let the router release and renew every hour automatically)....
    Seems like I will switch back to v1.0.34 now and use port triggering for FTP and ICQ until there is a REAL fix...
    Such types of workarounds are never really good (i mean restart something to keep things working isn't really great - especially if it doesn't work in every cases)...

    Btw.: In this firmware (don't know about v1.0.34 - had only v1.0.33 installed before trying this firmware) the problem with daylight savings time still exists ...
     
  50. Sfor

    Sfor Network Guru Member

    Yes, it does. The daylight saving bug was never fixed, as far as I know.
     
  51. ghost_zero5

    ghost_zero5 LI Guru Member

    Yeah... I just noticed this myself (as I went back to v1.0.34).
    I wonder though: This bug wasn't there until a certain firmware version (I believe it was v1.0.26 or v1.0.29), was it?
    Until this one gets fixed I will currently use the "Brussels, ..." (also GMT+1 timezone) as there I get the correct time BUT I am not sure if it will then set automatically to none-daylight-saving-time at the correct date...
     
  52. Sfor

    Sfor Network Guru Member

    I have a WRV200 for more than a year, now. It was never working correctly with the Warsaw time zone. I do not know about other time zones.
     
  53. woodmouze

    woodmouze LI Guru Member

    The DYNDNS issue is resolved in 1.0.36 !
     
  54. jcasares

    jcasares Guest

    Is it only me or the 1.0.32.2 (official) is the only one where QuickVPN works well. I couldn't use the tunnel after migrating to 1.0.36 and so tried 1.0.34 and 1.0.33 with the same issue. Returned to 1.0.32.2 but the issue with the GUI is a real stopper so we're returning the devices and buying another brand.

    And I loved some old Linksys routers... it seems the Cisco buyout brought the same issues we experience with IOS on their routers. Constant and permanent bugs.
     
  55. cactusfazer

    cactusfazer Network Guru Member

    The QuickVPN works well with 1.0.33. Remender to create new certificate or import export of the old one when you update the firmware.
     
  56. woodmouze

    woodmouze LI Guru Member

    Is QuickVPN any standard that should be considered... I don't think so.
    I just install Netscreen Remote, and use the IPSEC instead (didn't try this on the WRV200 though, but the WRV54G connected great with this tool)
     
  57. RadioActiveMan

    RadioActiveMan LI Guru Member

    Is there any - stable - firmware for wrv200 expected? And which firmware supports a working Quality of Service? I´m very disappointed about the code quality of Cisco/Linksys. :sadbye:
     
  58. Sfor

    Sfor Network Guru Member

    The code of the WRV200 is being developped by Gemtek, as far as I know. So, it's hardly the Linksys code.

    WRV200 is a rebranded WRTR-147G designed by Gemtek.
     
  59. melachi

    melachi LI Guru Member

    Here are my problems if anyone can help pls:

    -1 on the lates beta versions wireless is not stable at all.. I have to restart my router almost every hour or 2...

    -2 on the official release VPN just does not work!!! but the most important problem is that AOL MIRC and sertain MAIL ports like POP3 get blocked twice a day for some reason and the only solution is to restart the router once in the morning and once in the afternoon!!!!
    CAN SOMEONE HELP PLSSSSSSSSSSSSSSSSSSS...thx
     
  60. cactusfazer

    cactusfazer Network Guru Member

    I have firmware 1.0.33 and it seem to be more stable than the last release. Wifi is stable, POP3 is ok but i don't use MIRC. With 1.0.35, VPN is not stable for me so i have to go to older version : 1.0.33 !!
     
  61. alb1us

    alb1us LI Guru Member

    pap2

    I switched to 1.0.36 and I still have the same problem with my linksys pap2... It falls in each short while.

    wrv200 :thumbdown:
     
  62. pepemosca

    pepemosca LI Guru Member

    I have already installed the 1.0.32.2: what should I do!?! Should I install the 1.0.34?

    I had brick-ed my router trying to install the 1.0.36... now I have a new device -thanks to Linksys warranty-: what should I do?

    Ideas? Help?
     
  63. cactusfazer

    cactusfazer Network Guru Member

    For problems with the PAP2, you MUST have a network like this : 192.168.x.x
    I was having the same problems and the support of linksys told me to do this! and it's ok now !!
     
  64. Sfor

    Sfor Network Guru Member

    I'm doing direct IP dials to outside of my LAN with my PAP2 adapter.

    So far everything was working very well. But, recently I started to do dials through VPN tunnels. In order to do so I had to change the PAP2 settings. To be more precise I had to remove "EXT IP:" setting I was using so far. I was able to connect through VPN tunnel, but other problems started, to appear.

    After an investigation I came to conclusion the SIP application layer gateway hangs, from time to time. With the "SIP application layer gateway" disabled I was able to make calls. After enabling it back, the calls were working in just one direction.

    I'm using port forwarding feature, so the SIP application layer gateway is not necesary for me. Ports 5060-5061 and 16384-16482 are forwarded to the PAP2 LAN IP. If the EXT IP in the PAP2 is set to the WAN IP of the WRV200 everything is working correctly, with exception for the VPN tunnel dialing. But with the EXT IP disabled I had to disable the "SIP application layer gateway" in the WRV200, as well.

    The EXT IP setting is available on the PAP2: admin login - advanced view - SIP screen, and its off by default (as far as I know).

    The "SIP application layer gateway" setting is available on WRV200 firewall screen, and it's on by default..
     
  65. cactusfazer

    cactusfazer Network Guru Member

    I don't understand why you want to make call from a VPN tunnel !
    For the configuration of the PAP2, i can't see what you are doing because my PAP2 is pre-configured for phonesystems.
    For my configuration, i use VPN tunnel for connecting to work and WRV200 have not port forwarding for the PAP2. The application layer gateway is enabled.
    Try to put the PAP2 on the DMZ.
    What IP have the WRV200?
     
  66. Sfor

    Sfor Network Guru Member

    I do not want to dial from a VPN tunnel, I want to dial through it. I mean two PAP2 adapters on both ends of the tunnel. In case the offsite WAN IP changes the offsite PAP does have the same LAN IP, still. So, it is possible to connect to it using the same IP, always.

    I have an unlocked PAP2. So, I have the access to every option.

    If I would put the PAP2 in the DMZ zone I would give the access to all it's ports. With the port forwarding feature I have a better security, I believe.

    The port forwarding, or the DMZ can replace the "SIP application layer gateway" in most cases. I proved the SIP gateway does not work reliably, so it is better to use the port forwarding or DMZ, instead.

    Today, the same problem happend with another WRV200. After disabling the SIP gateway, the SIP communication started to work properly, just as in case of my WRV200.
     
  67. pablito

    pablito Network Guru Member

    Are you saying that SIP over the VPN is or isn't working reliably? That is how I do it and so far it is flawless. For non VPN routing I can't say as I've done it with RVs other than the RV200. Unless you are making direct SIP calls to the unit you generally don't need port forwarding if the PAP is registering to a PBX or service outside.
     
  68. Sfor

    Sfor Network Guru Member

    I said I had to remove the EXT IP setting in the PAP2. As, it did not want to do direct IP dials with this option set.

    Without the EXT IP setting, the direct IP dials through WAN were failing from time to time. So, I had to disable the SIP application layer gateway in the WRV200.
     
  69. DerToob

    DerToob LI Guru Member

    Since i installed 1.0.36 i can't access the router and internet by wireless lan after a couple of days. It seems, that the DHCP Server assigns no ip adress to the computer.
    Switching the router off and on did not work.


    Edit 03.12.07:

    I think i found the problem:

    I assigned static ip for the PC. I had no problems with it in earlier firmware versions or with 1.0.36 and cable connected clients.
    So i removed the entrie.
     
  70. horizon

    horizon LI Guru Member

    Hi gents,
    last week I upgraded from 1.0.32.2 to 10.0.36 and it solved my issue with torrents (and hanging wrv200), however I am suffering from two problems:
    1. unability to make icq protocol (using miranda) to work. (msn and jabber work ok).
    2. I am unable to connect via cisco vpn client to work.

    I have got adsl 2048/128. (Both of my apps two work without any issue via my 3g pcmcia card so the problem won't be in my laptop's conf. And I generaly don't see any reason, why they should require any kind of router's special setting.)

    So far I have testing via wireless connection. I'll try direct rj45 to check if it makes any difference... What I am thinink about is possibility, that my router uses nat AND my provider also uses a sort of nat. (Despite of having public ip...) This could potentialy case problem with cisco IPsec...
     
  71. horizon

    horizon LI Guru Member

    Sooooo, the update:
    1. icq seems to somehow confuse router, because by now I can easily connect on any (other than 5190) port... I guess that port by port will be becaming unusable... these are miranda logs...
    port 5190
    Code:
    [23:34:09 (NULL)] KeepStatus: assigning status 40072 to ICQ
    [23:34:09 ICQ] Authenticating to server
    [23:34:09 ICQ] Connecting to login.icq.com:5190
    [23:34:30 ICQ] D:\Projects\miranda-0.7.3\miranda\src\modules\netlib\netlibopenconn.c 546: connect() failed (10060)
    [23:34:30 ICQ] Unable to connect to ICQ login server
    
    
    
    The server did not respond to the connection attempt within a reasonable time, it may be temporarily down. Try again later. (error 10060)
    
    port 80
    Code:
    [23:32:38 (NULL)] KeepStatus: assigning status 40072 to ICQ
    [23:32:38 ICQ] Authenticating to server
    [23:32:38 ICQ] Connecting to login.icq.com:80
    [23:32:38 ICQ] (5004) Connected to login.icq.com:80
    [23:32:38 (NULL)] UPnP disabled. Internal Port: 2687
    
    [23:32:38 ICQP2P] (2400) Port 2687 opened for incoming connections
    [23:32:38 ICQ] (00CE9A88:5004) Data received
    00000000: 2A 01 FF 56-00 04 00 00-00 01                    *.˙V......
    [23:32:38 ICQ] (00CE9A88:5004) Data sent
    00000000: 2A 01 04 38-00 0C 00 00-00 01 80 03-00 04 00 10  *..8......€.....
    00000010: 00 00                                            ..
    
    All other ports act as port 80. (We'll see tomorrow :) ) Luckily Miranda has an option to try to connect using random port each time. (icq servers accepts connections on all ports.)

    2. Regarding cisco vpn, the behavior was on wifi is different than via rj45... (but still unsuccessful, however problem could be elsewhere :) )...
     
  72. tsampair

    tsampair Guest

    WRV200 with beta 1.0.36 SIP failure after 15 hours

    :eek:
    I have tried several firmware version from 1.0.32 thru 1.0.36 and all have left me with no VOIP service after some number of hours. Version 1.0.32 seemed the best for the number of hours before failure. The time differential could be a result of the difference in normal internet traffic or at least this could be noted. In my case the number of users could vary from 1 to 6.

    My Setup for the WRV200:
    1. Wireless has been disabled to remove this has a factor.
    2. 5 VlLANs configure, only 2 used. VLAN 1 is for normal user internet traffic and this configure on ports 3&4, port 4 only one used and is tied to SR216. VLAN 5 is configured for ports 1&2 and port 1 is only one used and is connected to a Grandstream GXW-4008 configured in bridge mode with a Linksys PAP on the switch port of the GXW-4008.
    3. SIP ALG Enabled
    4. QOS - Bandwidth allocation only SIP 65%

    I have tired both port forwarding and DMZing as well as disabling the SIP ALG. All seem to result in both the GXW-4008 and the Linksys-PAP dropping SIP packets. I have not put a packet sniffer to monitor during the failing state, since it's a remote office. It would have been nice to have use the VPN to packet sniff, but that is not possible....

    Any thoughts...comments?

    Thanks,
    -tim
     
  73. woodhillav

    woodhillav Addicted to LI Member

    Cannot download

    I would love to download these files but whenever I try, I am told that it is an Invalid File ID, and I get redirected. Is there anywhere else I can get the firmware?
     
  74. Sfor

    Sfor Network Guru Member

    The newest beta is 1.0.38, now.

    The downloads of beta firmware versions are not available any longer.

    You should contact the Linksys support. Linksys stopped providing beta firmware revisions on public servers.
     
  75. HughR

    HughR LI Guru Member

    Once you get it, do ask them for the source. They are obligated by the GPL to give it to you. And you are then allowed to give it to us. Please do! I'd really like to get the latest source.
     
  76. woodhillav

    woodhillav Addicted to LI Member

    WRV 200 Firmware Beta

    Well, I was having an interesting problem with my WRV200 in which I was basically getting a ping flood coming from my router to the broadcast address, 192.168.1.255. This started about 20 minutes after my router was turned on, or rebooted. It would start of slow, just one ping per second, then it would gradually increase to over 20 pings per sec or more. This, in effect, crashed the router, and I would have to reboot.
    I eliminated this being a DoS attack by disconnecting my internet and deactivating my wireless on the router. I then narrowed it down to being triggered by my boss's brand new Dell Dell Latitude D830. The ping flood continued even after the Latitude was shut off, until the router was rebooted. However, it did not happen on any other router model or brand.
    I contacted Linksys tech support and the case was escalated to a Case Escalation Manager, (i'm not sure what that means) who said the matter was going to be brought to the attention of Engineering. He also said that they had only heard of this issue a few times before. When I asked for some beta firmware, I was told I needed to wait until it was investigated by engineering and rewritten.
    Currently, I'm hoping to hear back about some new Beta firmware.

    If anyone knows anything about this issue, please let me know. I have packet capture file from Wireshark that shows some interesting info.
     
  77. LBSources

    LBSources LI Guru Member

    Sfor cleared it up for me..
     
  78. evarlast

    evarlast Guest

    are these still current? I need ANY upgrade for WRV200. 1.0.32.2 is HORRIBLE. dhcp stops. FTP fails. ipsec vpn fails. This is a horrible product.
     
  79. Sfor

    Sfor Network Guru Member

    The newest beta 1.0.37 and 1.0.38 are much better, then the official 1.0.32.2 firmware.

    The development of the firmware for this particular device is quite slow. Unfortunatelly, we have paid for it, already. This device is very cheap, when compared to the advertised parameters. No wonder, it runs on a "cheap" firmware.
     
  80. BaVar|An

    BaVar|An Addicted to LI Member

    hi all, i just bought a wvr200 running on the 1.032.2 firmware who s always crash my internet but keep my TS server on LAN ok(?!?!?!). i think my router just need an update but which one do i choose, 1.0.35, .36, .37 or .38 ??? thx for fast reply, im bored to loosing my connexion during BF2.... :mad::thumbdown:
     
  81. Sfor

    Sfor Network Guru Member

    The last official release is 1.0.39.
     
  82. BaVar|An

    BaVar|An Addicted to LI Member

    thx Sfor!!! :D i' ll update right now :p
     
  83. Sfor

    Sfor Network Guru Member

    It will be necesary to do the factory defaults routine, after the upgrade.

    It is wise to do the same before the update, in order to be sure the upgrade will go correctly.
     
  84. pepemosca

    pepemosca LI Guru Member

Share This Page