1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRV200: VPN with dynamic IP

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by RadioActiveMan, Nov 16, 2006.

  1. RadioActiveMan

    RadioActiveMan LI Guru Member

    Hi community,

    I´m using firmware version 1.0.24 und try to connect from my local laptop to my router WRV200 via VPN. But no connection between gateway and dynamicIP seems to be possible. (It´s only for testing purpose)

    Internet Connection Type: PPPoE
    Local IP Address
    Subnet Mask
    Start IP Address
    Status: DDNS is enabled (after registration by DynDNS.org)

    VPN settings are nearly the same as shown in the video (thanks!)

    Local Secure Group: Type Subnet
    IP Adress:
    Remote Secure Group: Type: ANY
    Remote Secure Gateway (WAN) Type: FQDN XXX.dyndns.org

    VPN Client is registered. Windows XP Firefall is disabled, but no connection from Laptop via QuickVPN (Port 60443) to WRV200 is possible. Any idea?

    Maybe someone can send me a screenshot with the correct settings? Thanks for any information.
  2. TazUk

    TazUk Network Guru Member

    Any reason why your using class A IP addresses? You would probably have more success using class C addresses such as 192.168.0.x and 192.168.1.x

Share This Page