1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRV54G VPN Problems

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by RafaelK, Jun 17, 2004.

  1. RafaelK

    RafaelK Network Guru Member

    Hi,

    I've recently bought a WRV54G and I'm having trouble configuring a VPN between the router and my laptop with WinXP Pro while I'm out of home. Does ne1 have a guide so I can configure that? Wich VPN Client should I use?

    My network layout is the following.

    WRV54G connected to the net via ADSL PPPoE Connection.
    DynDNS to solve the Dynamic IP issue.
    3 computers connected to the router via wireless connections with fixed IP adresses.

    I want to be able to connect to my home network from anywhere via VPN and access the files on one of the three computers.


    VPN Passthrough


    Below is the routers VPN config:

    IPSEC Passthrough: Enabled

    PPTP Passthrough: Enabled

    L2TP Passthrough: Enabled

    VPN Tunnel

    --------------------------------------------------------------------------------

    Select Tunnel Entry: Tunnel 1 (XXX)

    VPN Tunnel: Enabled

    VPN Gateway: Enabled

    Tunnel Name : XXXX

    --------------------------------------------------------------------------------

    Local Secure Group
    Subnet

    IP: 192.168.1.0
    Mask: 255.255.255.0

    --------------------------------------------------------------------------------

    Remote Secure Group
    Any


    --------------------------------------------------------------------------------

    Remote Secure Gateway
    Any


    --------------------------------------------------------------------------------

    Encryption : 3DES
    Authentication : SHA1

    --------------------------------------------------------------------------------

    Key Management
    Key Exchange Method : Auto(IKE)
    PFS : Enabled

    Pre-Shared Key: XXXXXXXX
    RSA Signature :
    Key Lifetime : 3600

    --------------------------------------------------------------------------------

    Status
    Waiting for Connection

    --------------------------------------------------------------------------------


    How do I configure the router and the client? What client should I use.


    Thanks for your cooperation,


    Best regards,

    Rafael K
     
  2. Toxic

    Toxic Administrator Staff Member

  3. RafaelK

    RafaelK Network Guru Member

    Not that i'm aware of.
     
  4. JonAlthoff

    JonAlthoff Network Guru Member

    not possible at this point

    Either replace the WRV54G with a different VPN router, write better firmware from the sourcecode or come up with new firmware from snapgears linux distribution.
     

Share This Page