1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WVC54G - no wireless

Discussion in 'Other Linksys Equipment' started by H3ctor, Feb 20, 2006.

  1. H3ctor

    H3ctor Network Guru Member

    Hi

    My camera works fine when connected but no wireless. Linksys provided the following instructions:

    "Perform the following steps to access the router’s Setup page:

    1. Open a web browser and access http://192.168.1.1.
    2. A login screen may appear. Type "admin" on password and leave the username blank and hit Ok button. Or type your own password if you have changed that.
    3. Click on the Wireless page, on the Basic Wireless tab look for the Wireless Network name or SSID.
    4. Open the Wireless Security sub tab. Copy the network key that corresponds to your Default TX or Transmit Key.


    Perform the following steps to access the router’s Setup page:

    1. Open a web browser and access http://192.168.1.115.
    2. A login screen may appear. Type "admin" on the username and password and hit Ok button. Or type your own password if you have changed that.
    3. Click on the Setup tab. On the LAN Setting field set the Gateway with the router’s IP address.
    4. On the Wireless Settings field the Network type has to be set to Infrastructure. Set the SSID same as what you have on the router. Click the Edit Security Settings button to enable encryption. Click Save Settings after making the changes."

    What should the Gateway address be?? I've seen several different explanations on this!
     
  2. kmeirlaen

    kmeirlaen Network Guru Member

    First, the gateway should be 192.168.1.1

    However, if your camera is working fine in wired mode, it should also work in wireless mode. What exactly is not working in wireless mode?

    regards,
    Kristof Meirlaen
    http://motion.kri-soft.be/
     
  3. H3ctor

    H3ctor Network Guru Member

    Hi

    Not working as in no connection to the WAN...

    H
     

Share This Page