Discussion in 'Other Linksys Equipment' started by Piske, Feb 18, 2006.
I'va a wag54g v2... which firmware do I have to install??? (now I've 1.01.01
thanks a lot
For the moment the best version is the 1.01.22
thanks a lot!!! where can i download it?
excuse me.... but it's this one?
# EU v1.01.27 - 3.4MB - Beta - Latest EU Firmware !!! NEW - Uploaded 2005-12-13 !!!
You asked for the 'BEST' not the latest!
the answer you got is right !!!!!.
Take it or leave it!
ok I'll try! thanks a lot
No, this one !
For the Netherlands?
Which Annex A is currently the best for the netherlands?
Currently running 1.01.15
I broke my WAG54G out of the box for old times sake just to try some of this firmeware floating around.
Well, after I flashed it with each version, the EEPROM on the router seems to be stuck on Ver 1.01.7 (and I don't remember loading that, hmmm). Anyway, the version I'm trying now is from the link High-Speed posted, and I've noticed that the wireless is "Fantabalous!!" along with good throughput. Right now, I've got two vpn tunnels running, I'm streaming "Yahoo Launch! with Amerie shaking her sexy arse with Eve, while simultaneously typing this email.
I'll give this firmware "two snaps up" in a "Z" formation for right now...
I use this one too, and it worked well for months, but now i have frequent disconnections of my notebook from the wireless network...my pc has an Intel 2200 BG wireless card with the latest drivers...what can i do??? Do you think that upgrading wag's firmware may help???
This is not a firmware issue !
Change the channel, move the antenna position, beat down the walls, etc. !
Firmware - Where you leave
I wondering if you can use any firmware independtly of the place you live. I take my exemple, I leave in France (FR) but what happend then if I instal the last AU (australian) firmaware on my WAG54GV2 ? Would it be possible to connect on XDSL (PPoE) ?
(I don't care in this question of any regulation due to 2.4Ghz band....)
Thanks of you help...
Ok...but why did it work well till last week??? I'll try if something changes opening a large hole in the wall
Re: Firmware - Where you leave
This is not possible because the AU firmware is bigger than the EU !
WAG54G-AU 2.0 has more memory than the others...
Because something has changed !
The wireless signal can easily loose power (noise, rain, etc.) !
ok :thumb:, i'll try something :rockon:
I just got a WAG54G V2 a week ago Currently running 1.01.15 and I would like to up firmware to 1.01.22
My Question is if 1.01.22 is not work well It's possible to downgrade Fimware and How
yes, reupload old firmware
I have had no trouble upgrading and downgrading, just load the software version you want. I did not notice any difference between 1.01.22 and 1.01.27
Is 1.01.22 (or 1.02.7) good with a version 1 WAG54G?
>>For the moment the best version is the 1.01.22
Does the recommendation of 1.01.22 hold for a version 1 device?
I think (fear) I have a WAG54G version 1. Box simply says
WAG54G, UPC sticker on box says WAG54G-UK, back of unit says
WAG54G, can't find any mention of ADSL2 on the retail box,
S/N CF600D210054, purchased about 5 months ago in Monaco.
I'm running 1.01.6, and would like to try 1.02.7 (since it is known
to add WDS bridging and work well with the WRE54G), but I'm
afraid to do any firmware upgrade since most of the firmware version
recommendations seem specific to V2 devices. I don't want to
wedge the device and be unable to boot or connect at all.
it says on the bottom of the router what version it is
>>it says on the bottom of the router what version it is
Actually, no, it doesn't.
I understand from various posts that this means it's version 1.