ADSL2Mue > BEFSR41-V3 howto

Discussion in 'Cisco/Linksys Wireless Routers' started by eadw, Mar 17, 2005.

  1. eadw

    eadw Network Guru Member

    Hello All,

    I'm kind of newbe here and have problems getting the mentioned
    modem -router working

    Situation: ADSL static IP, Linux server acting as firewall/router, no DHCP

    When using just ADSL2Mue, connected to my server, outgoing traffic
    works fine. Incoming traffic however does not come through the modem!

    When placing BEFSR41 between the modem and the server, I have no internet connection at all.

    The protocol set on the modem is PPPoA
    The local IP of the modem is set to
    The local IP of BEFSR41 is set to

    could anyone give me some hints.

    thanks in advance,

  2. eadw

    eadw Network Guru Member


    Hello All,

    Well, after some consultation with linksys helpdesk it turned out that
    the modem ADSL2MUE needs a firmware upgrade in order to allow
    incoming traffic. Further it seems that port 80 will not be forwarded, also to be corrected in the next firmware version.

    best regards,

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice