Discussion in 'DD-WRT Firmware' started by piripallo, Dec 16, 2005.

  1. piripallo

    piripallo Guest

    Is it possible to use ag241 with dd-wrt firmware?
    Thank You
  2. bytes2000

    bytes2000 Network Guru Member

    from hwsupport.txt

    this firmware has been tested under the following router models

    WRT54G 1.0/1.1
    WRT54G 2.0
    WRT54G 2.2
    WRT54G 3.0
    WRT54G 3.1
    WRT54G 4.0
    WRT54GL 1.0

    WRT54GS 1.0
    WRT54GS 1.1
    WRT54GS 2.0
    WRT54GS 2.1
    WRT54GS 3.0
    WRT54GS 4.0
    ASUS WL500G-Deluxe
    Motorola WR850G --> see flashing notes
    Siemens SE505 --> see flashing notes

    additionally there is untested support for:

    Buffalo WBR-G54

    Siemens Flashing notes:
    for flashing the Siemens gigaset SE505, you have to use the dd-wrt.v23_mini_generic.bin
    with boot tftp on
    since the siemens default settings do not fit to the linksys/dd-wrt ones you have additionally
    to check your configuration details after flashing.

    Motorola WR850G flashing notes:

    just use the dd-wrt.v23_mini_moto.bin for initial flashing of the motorola device using the boot
    wait state.
    never, and i say never try to clear the nvram by the mtd utility. (mtd erase nvram). this will also
    delete your hardware mac adresses which arent stored in the cfe like in other routers.
    dd-wrt itself prevents this if a motorola router is detected, but the commandline mtd utility
    can still brick your router in this case
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice