Allnet WLan cams deployment problems with Linksys HW

Discussion in 'Networking Issues' started by thyssen2k, Aug 31, 2006.

  1. thyssen2k

    thyssen2k LI Guru Member

    Hi guys,

    i've got a nice problem here, i can't seem to solve it at the moment. maybe anyone of you might have an idea, why this thing doesn't work as supposed.

    first some background info:

    here in my firm we are installing allnet 2210 wlan cams on two floors.

    on the first floor, we have a linksys wrt54gs 5.1 router with the latest original firmware. on the second, we have a wre54g v3 (firmware 3.03.02).

    as i set up the cams on the first floor, they all connect to the wrt. so far so good. we installed the wre on the second floor, because we loose connections to the cams which are to be installed there.

    the thing is, it still doesn't work. the cams don't seem to want to connect through the wre.

    if i wander around both floors, i can see with my notebook, that it connects properly, either with the wrt or with the wre. whatever is closest. that seems to work well.

    i wonder why the cams just don't want to connect to the wre. they should though.

    anyone of you out there with any ideas what i could check or setup?

    thanks in advance.

  2. thyssen2k

    thyssen2k LI Guru Member

    solved *G*

    i have no idea why, but switching the wrt and the wre worked.

    in other words. the wrt to the second floor and the wre to the first.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice