[ASK] Block P2P While Using IP/MAC Limiter

Discussion in 'Tomato Firmware' started by davipiero, Feb 28, 2009.

  1. davipiero

    davipiero Addicted to LI Member

    Hi all...

    Anybody here knows how to limit P2P traffic and at the same time also assign dL rate/ceil based on IP or MAC address?

    I've already tried viktec mod and assign port 1024 - 65535 into lowest class in the original QoS setting. Unfortunately, the port that isn't apllied by the rule is automatically placed into default class not in unclassified. If I also enable the new QoS developed by viktec, I'm affraid the firmware will confuse which QoS to be applied for another port (eg: 80). Is it true?

    So, Anyone have solution to my concern?
    Thanks before....

    Tomato is the best :thumbup:
  2. peyton

    peyton Network Guru Member

    Try to put one by one p2p protocol in access restriction. If you selec IPP2P all it won't work.
  3. davipiero

    davipiero Addicted to LI Member

    What do you mean by "one by one"?
    What about another port like http port at 80? Where it will be classified?
  4. davipiero

    davipiero Addicted to LI Member

    Hi, anybody here knows something?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice