Autodial not working

Discussion in 'Other Linksys Equipment' started by san9jay, Oct 3, 2004.

  1. san9jay

    san9jay Network Guru Member

    I have a WAG54G which is setup with the firmware 1.02.5 and a PPPoA autodial connection.

    I am finding that the autodial feature is not working. Every second day or so the router will drop the connection and not retry the connection. The status page will correctly identify the PPP connection as disconnected. I have to manually start the connection by clicking the Connect button on the status page.

    Is this a known problem and is there a fix for this?
  2. yonnage

    yonnage Network Guru Member

    I know the autodial feature worked in earlier firmwares, and I used the 1.02.5 firmware briefly, without issues. Try reflashing the firmware again. There is a delay in redialing which is set on the setup page. And is usually set to 30 seconds, thsi is to make sure that the connection has timed outat the ISP end
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice