[b]No association with my AP¡¡¡¡¡[/b]

Discussion in 'Other Linksys Equipment' started by wonderwall, Oct 19, 2004.

  1. wonderwall

    wonderwall Network Guru Member

    Well I´ve just bought a WMP54G adapter. I´m trying to use it an infrastucture mode in a w98 SE desktop PC. But it doesn´t detect my AP; it´s a WRT54G from linksys.

    My AP works fine with my notebook and his XP Pro through its built-in wireless card. Well, it´s connected to a DSL modem from Dlink, DSL-300T.
    They have the following IPs:

    AP.- http//
    ; it works like a DHCP server and it´s also my gateway.
    Dsl modem.-
    My notebook.-

    Both; the AP and the WMP54G adapter are configured in a mixed mode and uses the same channel 11; the first is configured to use it and the second uses the autodetection method.

    My adapter is set up with its default properties. So;

    Should I set up my adapter manually; or should I change someting on my router (I have tried to disable XP and WRT54G firewall; but it didn´t work)???

    I guess I should change router´s channel or set my adapter up manually.

    Any ideas; to solve this problem.
    Note: My adapter is a WMP54G v.2.

    Thank you very much.
  2. Toxic

    Toxic Administrator Staff Member

  3. wonderwall

    wonderwall Network Guru Member

    I cannot use "LinKsys Easy Connect" cause my OS is not english; and I have installed adapter´s software first and then my adapter in my w98 SE OS.

    Any ideas; to solve the problem I mentioned before.

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice