BEFSR41 advanced routing subnet problem

Discussion in 'Networking Issues' started by ScottBat, Mar 19, 2008.

  1. ScottBat

    ScottBat Guest

    I have 7 branch locations on subnets in a private WAN. All the branches share the internet connection at our Metro office. I add static routes to the BEFSR41 in order for them to access the internet through the BEFSR41 across the WAN. I can only add 5 entries of the 20 spaces available. When I add the 6th subnet THEN, one of the subnets already entered that was working quits working. (Very slow, unresponsive, and times out) If I remove any of the 6 the five will work fine. I can add any five of the subnets and all is fine, add the 6th and problem begins. Any ideas? I'm running firmware ver. 2.00.02 and this is the 2nd BEFSR41 router I've put here.
  2. ifican

    ifican Network Guru Member

    Sounds like you have already figured it out, even though there are 20 slots the firmware is only capable of handling 5. It sounds like a classical hub and spoke network, if so you only need to upgrade the route at the metro office.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice