BEFSR41 v4 (firm 1.04.09)

Discussion in 'Cisco/Linksys Wireless Routers' started by voitzor5, Nov 16, 2006.

  1. voitzor5

    voitzor5 LI Guru Member


    I use a router BEFSR41!! and i already try to put the static ip on my pc but i still have the red thing :/ help me please!!
  2. voitzor5

    voitzor5 LI Guru Member

    when i put the port on the router (Port Range Forwarding) a few minutes "he" disconnects me from the router and i don't know why help me :/
  3. Toxic

    Toxic Administrator Staff Member

    who is "he" that disconnects you?
  4. voitzor5

    voitzor5 LI Guru Member

    router... (cable unplug) :/
  5. voitzor5

    voitzor5 LI Guru Member

  6. voitzor5

    voitzor5 LI Guru Member

    Why does it say that I am not connectable? (And why should I care?)

    The tracker has determined that you are firewalled or NATed and cannot accept incoming connections.

    This means that other peers in the swarm will be unable to connect to you, only you to them. Even worse, if two peers are both in this state they will not be able to connect at all. This has obviously a detrimental effect on the overall speed.

    The way to solve the problem involves opening the ports used for incoming connections (the same range you defined in your client) on the firewall and/or configuring your NAT server to use a basic form of NAT for that range instead of NAPT (the actual process differs widely between different router models. Check your router documentation and/or support forum. You will also find lots of information on the subject at PortForward). <- HOW CAN I DO? :/ help me
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice