BEFSR81 Setup page

Discussion in 'Cisco/Linksys Wireless Routers' started by Merkur, Jun 24, 2006.

  1. Merkur

    Merkur LI Guru Member

    I am trying to configure a BEFSR81 and having problems. The router has been reset, so I thought I should just be able to connect it to a PC and access it using

    The broadband or anything else isn't coupled to it when I am trying this? I tried with the broadband connected as well and it will not work.

    Any tips to getting into the setup on a BEFSR81 that has been reset?

  2. Merkur

    Merkur LI Guru Member

    Same result when the broadband is connected to the router. I reset the cable modem, reset the router using the button on the back (holding it in until the red light goes out) and restarted the computer.

    When I go to I do not get the config page. What am I doing wrong? This router has worked well for2-3 years and I moved it to another room, but cannot set it up.

    Any suggestions gladly accepted.

  3. rick5127

    rick5127 Guest

    hmm your first message said you were using
    Your second said

    You sure your using the 192 one? thats the address on mine.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice