Cisco 2620 config question

Discussion in 'Other Cisco Equipment' started by analyticworm, Jan 4, 2008.

  1. analyticworm

    analyticworm LI Guru Member

    I have a cisco 2620 router (I bought it used)

    In the back there is the ethernet port, Aux port, and I have a T1 DSU / CSU card installed.

    Now I am on a ATT DSL connection and I would like to know how to configure the aux port or the T1 card to work with my DSL modem. Or could someone link me a good site to where I can buy a WAN card that I can use. Although I dont have a static IP I am thinking of stepping up my service so I can have one.
  2. ifican

    ifican Network Guru Member

    You are not going to be able to use the the aux port or T1 card in the manner you want. Also if the port you have is ethernet and not fastethernet you are going to really limit yourself as well so check that again. Options that you do have, if the port is FE you can use something called "router on a stick" configuration, doing a search will bring up lots. You could also pick up another WIC, 2FE would be great but if the first port is an FE port then a 1FE would be fine. This way you can use the router like you intended to the in the first place. I guess a third thought is, if the price for the WIC seems a little much, hopefully it is a T1 wic, the price you can get for the T1 will more then cover the 2FE.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice