Cisco AP Aironet 1100

Discussion in 'Tomato Firmware' started by skynet74, Jul 15, 2007.

  1. skynet74

    skynet74 LI Guru Member

    Hi all, just a question, i've got a linksys wrt54gs with tomato, now i have also an aironet 1100 ap, i want to link the aironet with my wrt54gs,using the cisco as a repeater,but isn't working at all, cause it need for connecting and authenticating the ios (internetwork operating system) to the other end, anyone know if it is possible upload tomato into this ap???:rockon:

    Thanks to all for the answer!
  2. azeari

    azeari LI Guru Member

    dun think the cisco is supported by tomato, and i wouldn't risk uploading it over (=
  3. ifican

    ifican Network Guru Member

    Either run a long cable and connect the 2 making a roaming network or make the aironet a client of the WRT and basically use it as a bridge.
  4. skynet74

    skynet74 LI Guru Member

    I can't run a cable, because the two ap are in 2 different building, how to make the aironet a client of the wrt? i've tried to setup the aironet in repeater mode (non root) so i've put in the macaddress of the wrt in the configuration, but it keeps me tell that it can't associate as a client, i think it want to the other end cisco IOS to link to it.

    This is what i supposed,

    This is my network topology:

    Wan-------WRT54GS (root ap)>>>>>>Cisco Aironet(Repeater)-----Lan
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice