Compiling HyperWRT

Discussion in 'HyperWRT Firmware' started by dngrtenr, Aug 27, 2004.

  1. dngrtenr

    dngrtenr Network Guru Member

    Has anyone compiled the HyperWRT 1.3 code?

    Please let me know how I should apply the patch, and if there are any tricks to the compilation aside from the normal tricks to compile the linksys source...

  2. Avenger20

    Avenger20 Network Guru Member

    Just running the patch on the unpacked (and compiled) WRT54G directory (Linksys 2.04.4 firmware) should work. I you rather have the files I changed instead of a patch, just email me and I'll mail them to you :)
  3. dngrtenr

    dngrtenr Network Guru Member

    The reason I asked was that when I patched the files, I received errors because not every change could be made/found. What specific command should I use? I think I ran this command from my home directory:
    patch -p0 -u -d WRT54G/ <HyperWRT_v1.3_G.patch
    Also, I think I edited the file to change some of the path names.

  4. Avenger20

    Avenger20 Network Guru Member

    I made the patch from a compiled WRT54G directory instead of a cleaned out one :oops: That could give the errors. I will correct this in HyperWRT v1.4. If you need it urgent, just mail me and I'll send the changed files to you. That way you won't have to appy the patch manually.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice