configure Linksys PAP2 with 2 providers plz HELPPPP !!!! :(

Discussion in 'Other Linksys Equipment' started by Digidat, Sep 13, 2006.

  1. Digidat

    Digidat Network Guru Member

    Hi ppl,

    I have a Linksys PAP2 and wanted to use it with Voipbuster.
    Voipbuster is now not able to give out phonenumbers, so my PAP2 is useless for receiving phonecalls.

    I've browsed the web for the possebility of using an inbound and a different outbound provider, for example Voipbutser for making call's (nice and cheap) and Woize for receiving call's (they do give phonenumbers)
    Linksys PAP2 is unable to be setup with 2 providers
    I found out that the Linksys PAP2 is equal to the Sipura SPA2000, but that the Sipura SPA2000 does except two providers, what should solve my problem.
    The Firmware from the Sipura can not be uploaded into the PAP2.
    I found a tool on the forums (Wafro Tools) which changes the headers of the firmware from the SPA2000 to PAP2, so I could use the SPA2000 Firmware on the PAP2.
    I tried it, but although I now get the mssg that the firmware is succesfully uploaded (and after a reboot) nothing has changed, as far as I can see.
    So no luck there :(
    I have read about forwarding port 2 to port 1, what I don't understand

    Is there anyone out there who can help me with my issue ???????
    To make it simple: I want to be able to use 2 providers (1 for inbound / 1 for outbound) with my Linksys PAP2 adapter, since I want to use Voipbuster for making calls and use another provider (one that gives VOIP phonennumber's) for receiving call's.
    HOW ??? I don't care....using a hacked firmware / using a dailplan / forward my incoming port to my outgoing port on the PAP2 etc. etc.
  2. mazilo

    mazilo Network Guru Member

    Unless you have a Linksys/Vonage locked PAP2 runs on firmware v3.1.6 and/or older and want to have it unlocked, you don't need this SPATools.

    Just go to line2 and configure it with any VoSP of your choice. This is exactly how I configured my PAP2 to FWD (Line1) and StanaPhone (Line2).
  3. melgior

    melgior Guest

    But how do I dial to Line 2 with a phone connected to port 1? On some SPA's you should be able to dial # to switch lines but that doesn't seem to work with my wrtp54g.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice