Configuring 3725 as a Gateway for DS3 over a HSSI module

Discussion in 'Other Cisco Equipment' started by binderz77, May 1, 2007.

  1. binderz77

    binderz77 Network Guru Member

    Has anyone configured a 3725 or equivalent as a Gateway for a DS3 uplink through a HSSI network module and is willing to provide some suggestions? I need to know how the FE ports would be configured if the router is not doing any NAT. I can provide more information if somebody has experience about this.
  2. ifican

    ifican Network Guru Member

    Well that is going to depend on what you plan on doing with the lan interface. However it is pretty straight forward, all it ultimately needs to work is an IP on the same subnet as another device. Now what that device is or how you choose to make the interface on the router act (dhcp server of what not) is up to you.
  3. binderz77

    binderz77 Network Guru Member

    It turned out to be pretty straight forward. The confusion arose because the ISP provided the wrong set of usable IP address space. Thanks for the help, anyways.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice