Creating another SSID for guests/etc

Discussion in 'Tomato Firmware' started by Boktai1000, Jan 25, 2019.

  1. Boktai1000

    Boktai1000 Network Guru Member

    Hi-

    So with Tomato Firmware on an R7000 I'm aware that I have access to creating an SSID for both the 2.4Ghz and 5Ghz Wireless networks.

    But lets say I wanted to create an additional SSID on either of those frequencies (2.4 or 5), how would I create another SSID from Tomato and in addition, if I wanted to lock this down for guests or insecure devices, what is the recommended way for going about and doing that?

    Thanks!
     
  2. rs232

    rs232 Network Guru Member

    Advanced/Virtual Wireless
    and
    Advanced/VLAN

    make sure Guest WLAN and main WLAN are on different VLANs


    Under
    Basic/Network
    you can enable the new subnet and DHCP
     
    smuis1 likes this.
  3. Cliffield

    Cliffield Connected Client Member

  4. smuis1

    smuis1 New Member Member

    Is there any script to automate enabling and disabling of that guest WLAN based on time intervals? (or whatever!)
    Thanks!!


    EDIT:
    Sorry! I've seen that the question was already answered in thread "script for wifi button LED ?"
     
    Last edited: Feb 13, 2019
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice