E3000 USB support

Discussion in 'Tomato Firmware' started by gs44, Mar 4, 2012.

  1. gs44

    gs44 Addicted to LI Member

    Hey everyone, got a quick question..

    I have my E3000 setup with a WD book (usb hardrive) and have the shareing and everything set so all users can access it.

    My question is with it formated to nfs which requires defraging sometimes, How would I go about defraging it? Is it possible somehow with it hooked to the E3000 or do I have to unhook it and plug straight into a pc to run disc defrag on it?
  2. ntest7

    ntest7 Network Guru Member

    You will need to plug the hard drive into a PC to defrag.
  3. mikester

    mikester Network Guru Member

    unless you are constantly adding and remving files from the drive you shouldnt need to defrag - defrag is best for HD's with OS's running on them - I wouldnt bother with defragging a storage device
  4. gs44

    gs44 Addicted to LI Member

    Ok I figuerd as much but figured I'd ask here just to verify, thanks for the responces!!
  5. bucher

    bucher Networkin' Nut Member

    You will get much better performance using Ext3.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice