Firmware Verision Issue of Wag54g V2

Discussion in 'Linksys Official Firmware' started by whynot, Nov 3, 2008.

  1. whynot

    whynot Addicted to LI Member

    Appreciate for your attendtion first and looking forward your ideas:)

    Mine is Wag54G V2,
    It worked well except something tiny noise before I did upgrade the firmware "WAG54GV2-AU_v1.02.13-Pluto".---from--

    After I did the upgrade, it doesn't work anymore, no ping to & LED power blink continuously.
    So i plan to reflash the firmware, I feel something confused by the replies in some topics of the forum, who can give me some idea

    1, which version shall i apply for?
    2, Wag54g V2, where shall I download the firmware Linksys-Au or Linksys-UK,or some other place? It seems that when I sort the same Wag54g V2 in 2 different site the different firmware version I will get.

    For example:
    Linksys-Au ---get result---->WAG54GV2-AU-AnnexA-FCC-v1.02.20-code
    Linksys-UK ---get result--->WAG54G-UK_v2_ETSI_1_01_15

    Here is the information of the former firmware (works well)

    Firmware Version:1.02.20 , Oct 17 2006
    Boot Version:0.22.14

    DSL DSP Datapump version: [] Annex A
    DSL VPI/VCI:8/35

    RF Status:enabled
    RF Firmware Version:
    RF Domain:ETSI (channel 1~13)
    RF Channel:11
    RF SSID:Linksys

    -----Dynamic Information
    RF Mac Address:00-18-39-5D-EC-6F
    LAN Mac Address:00-18-39-5D-EC-6F
    WAN Mac Address:00-18-39-5D-EC-70
    Hardware Version:00.0000
    Fast Mode Downstream Rate:1504 kbits/s
    Fast Mode Upstream Rate:128 kbits/s
    CRC Up:0
    CRC Dn:0
  2. whynot

    whynot Addicted to LI Member

    another question, how can make the route quiet without the noise sound?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice