Firmware wag54gs

Discussion in 'Other Firmware Projects' started by Gian, Jul 5, 2006.

  1. Gian

    Gian LI Guru Member

    I can't find firmware for wag54gs
    Only wag54gv2....
    It's same software??
  2. Toxic

    Toxic Administrator Staff Member

    NO the G does not include Speedbooster.

    The UK site has GS firmware hoever it is AnnexA firmware. (POTS) AnnexB would be over ISDN and maybe The linksys German site would have that.

    what version of firmware do you have?
  3. Gian

    Gian LI Guru Member

    Version V1.00.06

    I'm Dutch :thumb:
  4. Toxic

    Toxic Administrator Staff Member

    Both UK and German linksys sites show this is the latest firmware for the GS.

    you could ask Tech support for any new beta firmware, but unless you have a real problem with the GS that they have a fix for in a new beta firmware (if one exists) then your stuck with 1.00.6
  5. Gian

    Gian LI Guru Member

    Mwa... no beta sofware for my modem :)

    I've hear version V1.00.08 ready, but probaply ist'n treu info.

    Ok thank you

  6. HiSpeed

    HiSpeed Network Guru Member

    You're right !
    1.00.08 exists (EU annexA) !
  7. patrick9999

    patrick9999 Guest

    if you want i have :


  8. gorta34

    gorta34 Network Guru Member

    Can I have the link for the two Files please.
    Or send them to my email address
  9. HiSpeed

    HiSpeed Network Guru Member

  10. gorta34

    gorta34 Network Guru Member

    Thanks for link
  11. saziz3812

    saziz3812 LI Guru Member

    WAG54GS is possible we upgrade
  12. n_casquinha

    n_casquinha LI Guru Member

    Hello, so it seems to be a general problem on the wag54gs router...
    Well i have just updated mine!It was a nightmare but it is pretty easy!
    I have downloaded from
    from the EU folder, that is for annex A, the
    and it was only with that utility, that i was able to pass from 1.00.06 to 1.00.08A ...
    I have given my computer a static ip ( and then i hard reseted the router in the small button in the back for about 10-20 secs.
    After finishing the hard reset, i just ran the utility and puff magic :) just wait until it reboots again and all red light blinking disappear and when it looks normal IT IS DONE! you have just upgrade to 1.00.08A...
    wan't even better news!???afterwards i upgraded to 1.00.12 from the inside of internet explorer and using only the router gui interface!!!!!amazing what a litle firmware can do!Sorry for my english but i'm from Portugal!!! lol
    hope it helps! By the Way to access the links, in 19/1/2007...
    USER: linksys Password: beta559
    Any doubt don't hesitate to e-mail or just add me to your msn!
    I'll help anyway i can, even sending the files of course!
  13. skid7j

    skid7j LI Guru Member

    There is a general problem with the WAG54GS with firmware upgrading.

    You must update the firmware one step at a time using the firmware update page on the router

    Before updating, hard reset your router (put a pin in the back for 10 sec)

    Follow the list below which has been proven to work, starting from whichever version you currently have. DO NOT miss out any versions or you may run into problems. Remember to hard reset first and reboot between versions to ensure it goes without a hitch.

    • Hard Reset the router
    • Upgrade to 1.00.02
    • Reboot the router
    • Upgrade to 1.00.06
    • Reboot the router
    • Upgrade to 1.00.08
    • Reboot the router
    • Upgrade to 1.00.12
    • Reboot the router
    • Upgrade to 1.01.00
    • Reboot the router
    • Upgrade to 1.01.01

    To find the firmware files either email linksys or google them.
  14. namec

    namec Guest

    can any one post links for the firmwars, or please mail them to me

    thanks and let the force ne with you.
  15. ezervoud

    ezervoud LI Guru Member

    Over here you will find the latest firmware for Annex B and here for Annex A
    Latest version is 1.01.03
  16. yacoboy

    yacoboy Guest

    are there any custom firmware's for this model as i have it and want to boost my signal to 100% rather than the default 50%
  17. Vasiliosa

    Vasiliosa Guest

    i have Firmware Version: V1.01.01 and i'm having a lot of disconnects by my msn messenger. The Router stays on with internet connection. It just disconnects my 2 PCs (the 1 is running msn the other isnt ).
    Should i upgrade to 1.01.03? Does it matter that it is from a german site?
  18. ezervoud

    ezervoud LI Guru Member

    The firmware is multilingual (if I remember correctly), for sure English is one of the languages :)
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice