Gateway in subnet problem in IPTV FTTH.

Discussion in 'Tomato Firmware' started by Castorcillo, Apr 10, 2012.

  1. Castorcillo

    Castorcillo Networkin' Nut Member

    Hello everyone.

    I'm trying to watch spanish IPTV FFTH with Tomato Shibby tomato-E2000-NVRAM60K-1.28.RT-MIPSR2-090-IPv6-VPN.

    I can watch IPTV and I have a very good Internet connection with Tomato.

    The only problem is when the Deco needs to go Internet through its VLAN -VLAN2- (when I try to select an option of the Deco menu, i.e.) i'm getting an error.

    The scheme is basically as follows:

    A Router (Linksys E2000) and a Huawei OTN for the fiber .

    The configuration of the Router is:
    -VLAN2 Wan Tagged with 4 ports associated with LAN.
    -VLAN6 Wan Tagged.
    The tagged is needed to communicate with the OTN.

    -PPPOE configuration

    The Deco is in a Subnet of br0, br0:0, the same that the original Router.


    VLAN2 has a specific IP address. The same that the original Router.

    The routing table is the same of the original router.


    I'm using Udpxy.
    When I press the key menu of the Deco, an error appears. The message is that there is no connection. The Deco doesn't get Internet directly by the OTN, which is what I think he has to do.

    The communication with the OTN has to be tagged and I do not know if when it is "up" from the Deco, Tomato is tagging the communication.

    This is the only problem that I need to resolve to replace the original router -a Comtrend Wap-5813n- for my Linksys E2000 with Tomato.

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice