Hi, I've just received my WRT54G router, which seems to be working fine. Im trying to setup the router as an AP. My current network setup is as follows: A computer acting as server. Contains PCI Adsl Modem connected to 2mb DSL line. 2 Network cards. 1 network card with BNC connector connecting 3 computers. This card shares the internet. The IP address is 10.0.0.1, subnet mask: 255.255.255.0 The second card is a FastEthernet pci card which I have connected to the WRT54G. What I need help doing is setting up the router so it routes to 10.0.0.1, to let all wireless devices access the internet. Sofar I've got my pda connected to the router and can retrieve the setup page for the router. The router is running on IP 192.168.1.1. I set my second NIC on the server to 192.168.1.2 but am not really sure what it should be. Help would be greayly appreciated.