Help with VPN tunnel between WRV200 and Netscreen 25

Discussion in 'Networking Issues' started by c_rodell, Aug 5, 2007.

  1. c_rodell

    c_rodell LI Guru Member

    Has anyone tried to setup a VPN connection between a WRV200 and Netscreen 25. I've looked at all the tutorials and videos and tried several different configuration but cannot seem to get the VPN connection established.

    Let me know what I supply to help or if anyone has done this before if they could share there setup it would be greatly appreciated.
  2. DocLarge

    DocLarge Super Moderator Staff Member Member

    Do you have a screenshot of the netscreen setup page?
  3. ifican

    ifican Network Guru Member

    I have setup vpn's on both, and they are both straight forward though the netscreen can be a little screwy. I currently have a netscreen sitting on the border so if you would like to PM me with how you would like to setup a tunnel, let me know and you can run the wrv this way and if there is any issues i can tell you what i see.
  4. c_rodell

    c_rodell LI Guru Member

    Attached are screen shots of the netscreen 25 vpn gateway and autoIKE screens.

    Here is also my setup:

    Home - WRV200 1.0.29 firmware
    -nat with public IP and 192.168 internal

    Work - netscreen 25 5.0.x screenOS
    -nat with public IP and 172.25 internal

    Attached Files:

  5. c_rodell

    c_rodell LI Guru Member

    ifican - thank you for your help in getting this setup and tested. I will post the solution and setup here shortly and a couple of small modifications on the netscreen side and everything works great.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice