How to change gateway in DHCP scope

Discussion in 'Cisco/Linksys Wireless Routers' started by adegruijl, Dec 30, 2005.

  1. adegruijl

    adegruijl Network Guru Member

    I have a WRT54GX v2. It doesn't act as a router. The only use is as wireless AP and DHCP server.

    My workstations get the ip-address from my WRT as default gateway. I want the DHCP scope to be configured to give the ip-address of my other router as the default gatway. Is this possible?

    Bye the way, my other router is a FritzBox! and has less options to configure the DHCP server, so I disabled that one.
  2. 4Access

    4Access Network Guru Member

    Unfortunately this is not possible with the Linksys WRT54GX firmware.
  3. MarkInDavis

    MarkInDavis Network Guru Member

    Can't you connect the WRT54GX2 via a LAN port - leave the WAN (Internet) port empty. Turn off (disable) its dhcp server, and give it an appropriate ip address. Then let the Fritzbox (whatever that is) serve DHCP.
  4. adegruijl

    adegruijl Network Guru Member

    Unfortunatly the Fritz!Box has even less options to configure in the DHCP server.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice