How to config Dnsmasq as DHCP?

Discussion in 'Tomato Firmware' started by doal, Dec 8, 2010.

  1. doal

    doal Networkin' Nut Member

    I tried disabling DHCP option in Basic > Network and adding
    "dhcp-range=,,12h" in Advanced > DHCP/DNS > Dnsmasq Custom Configuration but no luck.
    Am I missing something? What should a Dnsmasq dhcp configuration look like?

    And, is it possible to tag dhcp discovery from wireless interface for separated ip pool?
  2. Azuse

    Azuse LI Guru Member

    Why would you want to set dhcp like that when people have already gone to the trouble of coding a gui for it..
  3. doal

    doal Networkin' Nut Member

    Because the GUI don't support assigning a different subnet in DHCP,
    and I could use multiple IP ranges/subnets to offer connectivity to some untrusted machines and free public wifi.

    That router could be more capable than what I previously know. And I believe squeezing every bit of it is one of the main reasons people look into Tomato, instead of buying a new one.
  4. Azuse

    Azuse LI Guru Member

  5. rs232

    rs232 Network Guru Member

    I totally agree the GUI is good for basic (common!) settings, but I do some intense manual dnsmasq configuration myself (dhcp,PXE,static routes to client, NTP,.pac location and so on)
  6. Toastman

    Toastman Super Moderator Staff Member Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice