How to dissable NAT in dd-wrt v.22 ...

Discussion in 'DD-WRT Firmware' started by bibloks, Dec 2, 2005.

  1. bibloks

    bibloks Network Guru Member

    ... I have static IP asighned to a PC (not to the router) so I want to do routing but not NAT.

    How can I do it in dd-wrt 54g.

    Many thanks for any reply


  2. 4Access

    4Access Network Guru Member

    Well if you want to disable all NAT functions simply go to the 'Setup -> Advanced Routing' page and switch the router from Gateway to Router mode.
  3. bibloks

    bibloks Network Guru Member

    thanks for the reply 4Access,

    Im at the offfice momentaly but I'll try it as soon as I'm home.

    One more thing; PC that has static IP asigned is in fact little server in Linux that I setup. I want to connect it to my friends server through UDP (proper ports are forwarded as well). so this settings as you suggested will route properly to server ??

    Thanks again mate :thumbup:

  4. 4Access

    4Access Network Guru Member

    Errrr.... well... that depends. I think you might need to better explain what you're trying to accomplish. Maybe include some IP addresses... You shouldn't need to forward any ports with NAT disabled as long as you disable the firewall... (See the 'Security' page.)

    Do you have to traverse the internet to contact your friends server??
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice