HyperWRT for Linksys Firmware

Discussion in 'HyperWRT Firmware' started by Ron2006, Jun 5, 2006.

  1. Ron2006

    Ron2006 LI Guru Member

    Hi all,

    I have a WRT54G v1.1 (CDF3) running Firmware 4.30.5. I would like to know if there's a specific HyperWRT version for this firmware? I have never used a 3rd party firmware version before so I don't know the requirements for an upgrade.

    I have been reading some forums and found some nice features such as the ability to see wireless connections to the router as well as filter Active X and Java.

    I also would like to know if it is possible to uninstall/remove this firmware if I'm not happy with it. Would this be done by applying a firmware from Linksys? Can anyone advise?

    Thanks in advance!
  2. lwf-

    lwf- Network Guru Member

    Download and flash this one (you have to unzip if first of course) and it should work fine. I recommend you to hold the rest button for 30 seconds before you flash it, and when the router is flashed an up again with thibor, do it one more time.


    If you want to go back to the linksys firmware (trust me, there is absolutely no reason to do that) you can always download the official one from linksys and simply flash it like you did when you flashed thibor or any other firmware.

    Good luck! :)
  3. Ron2006

    Ron2006 LI Guru Member


  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice