HyperWRT thibor17 rc3 does not update DDNS record correctly

Discussion in 'HyperWRT Firmware' started by Aquafire, Sep 29, 2008.

  1. Aquafire

    Aquafire LI Guru Member

    Hello All,

    I have already been trying Firmware Version : v2.07.0, HyperWRT + thibor17 rc3 on Linksys WRTSL54GS for a year. It "was" (development has ceased) the most powerful and close to original firmware with all the basic plus some geeky advanced options for making your router work better for you. The good feature it had is the out of box support for USB connected FAT32/NTFS harddisks in read/write mode which is a must for me since I have a couple of devices connected via USB.

    Unfortunately I have discovered that the Dynamic DNS (DDNS) update function in this firmware does not works correctly every time a dynamic WAN IP is changed. I have the Linksys connected in PPoE mode to a DSL mode in bridge mode. So the only time the DDNS record is updated is the first one, after that if there is disconnection/reconnection and the WAN IP is changed, then the DDNS update option still shows the old WAN IP and never runs the update.

    I wonder if any of you can guide me how to make it work correctly (cause it works fine on a rather cheap Aztech DSL600EU modem with thirdpart firmware).

    Thanks for your replying
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice