Inbound QoS in Toastman

Discussion in 'Tomato Firmware' started by tstrike2000, Feb 23, 2012.

  1. tstrike2000

    tstrike2000 Network Guru Member

    I'm used to the old QoS setup on a 54GL I used for a handful of years. In the newer firmware I just switched to on an E3000 (Toastman 495.3) is there a way to disable inbound QoS to make it similar to the way I had it setup before?
  2. Porter

    Porter LI Guru Member

    You mean you want it to be broken again? ;)

    You could post some screenshots of your old configuration and tell us what you are trying to achieve, what you need to take care of in your network.
  3. pharma

    pharma Network Guru Member

    I believe to disable Inbound you can set all inbound categories to 100, ie SERVICE 100% to 100%, VOIP/GAME 100% to 100%, etc.... In the MAX bandwidth setting put the Max your IP is providing.

    Have fun!
  4. tstrike2000

    tstrike2000 Network Guru Member

    Porter, QoS in the original Tomato has the option for None in place of a percentage for each inbound QoS class which effectively disables it. I only want to enable outbound as that's my main concern and have been doing that for years. I thought I read from Toastman that you can put None for the inbound's Max Bandwidth setting, but I can't remember where I saw that or if that even works.
  5. Porter

    Porter LI Guru Member

    Just set everything to 100% and pick a limit that's never going to be reached.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice