Incoming log on b034

Discussion in 'Tarifa Firmware' started by ymm123, Dec 15, 2008.

  1. ymm123

    ymm123 Addicted to LI Member

    The incoming log still does not work on b034 as you all might have noticed...
    Not a biggie but if a fix is on its way it is more than welcome

    jchuit, if you read this...
  2. jchuit

    jchuit Network Guru Member

    Hi ymm123

    My router does have a log, remote and locale (cat /tmp/var/log/messages).

    This is about the Incoming Log in the webpage? The Incoming Log at my router was empty too.

    In my remote syslog (install a remote-syslog client) there were messages like these, outside connections to my ftp server:

    2008-11-08 11:58:58 User.Warning kernel: ACCEPT IN=vlan1 OUT=br0 SRC= DST= LEN=40 TOS=0x00 PREC=0x00 TTL=111 ID=16031 DF PROTO=TCP SPT=49955 DPT=21 SEQ=18912542 ACK=1609092989 WINDOW=4277 RES=0x00 ACK FIN URGP=0

    But in general the most are from the inside to the outside 99,9....%, my log is about 90 Mbyte big.

    The Log used in the webpage is very small, the allocations used for inside and outside-log are shared, meaning that the Incoming log will stay most of the time empty by design.

  3. ymm123

    ymm123 Addicted to LI Member

    I see..
    OK thanks for your reply
  4. ymm123

    ymm123 Addicted to LI Member

    I indeed meant the incoming log in the web interface.
    The incoming log on the stock firmware (WRT54GL v1.1 4.30.12) is also empty...

    OK thanks for your reply
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice